Depending on your mounting atmosphere, you might want to safe the MR55 to its mount place. Your MR55 may be secured in various approaches. If the MR55 has become installed using the mount cradle, it should be secured by way of safety screw (Torx security screws are bundled) and/or Kensington lock. If your mount cradle wasn't utilised, the MR55 can still be secured utilizing a Kensington lock
The Cisco Meraki MR55 can be a dual-band organization course 802.11ax cloud-managed entry point with inner antennas. created for significant potential and high density, the MR55 fulfills the requires of one of the most demanding environments.
The MR55 may be operated in “operate dim” method For added security also to decrease the visibility from the accessibility place. On this method, the LED will not be illuminated. This mode may be enabled via Meraki dashboard.
making use of acceptable mounting components for your specific style of junction box, connect the mount cradle towards the junction box
Warning: because of the warmth dissipation in the back of APs all through standard Procedure, be sure to usually do not stack driven on APs along with each other throughout pre-installation to stop warmth harm.
stability screw – The accessory kit features screws that could be accustomed to safe the entry stage to the mount cradle. Engaging the security screw helps prevent accidental dislodging and theft.
the subsequent is a short overview only in the techniques required to increase an MR55 for your community. For thorough Recommendations about building, configuring and taking care of Meraki wi-fi networks, check with the net documentation (documentation.meraki.com).
Tip: Pre-assemble rubber spacers and screws for the mount cradle. The mount cradle can then be held with one hand while the other hand holds a screwdriver. If mounting your MR55 to the dropped ceiling, skip on the "energy the MR55" portion.
The MR55 will activate plus the LED will glow sound orange. When the device would not demand a firmware upgrade, the LED will transform either green (no customers connected) or blue (clients related) inside 30 seconds.
Configure the static IP handle, net mask, gateway IP tackle and DNS servers this AP will use on its wired relationship.
to be certain your MR55 performs optimally quickly following installation, read more it is suggested which you facilitate a firmware enhance before mounting your MR55.
Then alter the MR55 to guideline the MR55s bottom slot into the cradle’s base tab until it clicks into place. the moment in position, the MR55 needs to be secured to your cradle through the use of among the list of incorporated screws within the cradle’s bottom tab.
If a firewall is set up, it need to make it possible for outgoing connections on individual ports to distinct IP addresses. probably the most present listing of outbound ports and IP addresses on your distinct Firm can be found here.
We’re devoted to using the most effective technologies available to defend your own information; additional security steps retain you Safe and sound and secure.
The accessibility level also includes a 3rd radio focused on optimizing the RF surroundings and securing the airwaves in addition to a BLE radio for supporting IoT purposes.
When the button is pressed and held for at least five seconds then launched, the MR55 will reboot and be restored to its primary factory options by deleting all configuration information and facts stored on the device.